Cod. STD S3 1002
Offers a vented rubber nozzle, which creates a wide and efficient flow. Nozzle is silenced for a low noise level. Its rubber tip is designed for delicate surfaces or parts. This special safety nozzle is fixed on an angled stainless steel pipe, for narrow, hard-to-reach spaces; also, keep a safety distance from blown surfaces. The vented tip also prevents pressure exceeding 30 PSI (2 Bar) if the tip becomes blocked (conforms with OSHA Std 1-13.1).
AMPLA Airset Standard blow gun has been on the market for 30 years: a reliable product!
Two hanging options
By the trigger or by the specially designed lug. Both surrounding areas are enforced to withstand increased wear
Airset Standard blow gun is designed to reduce the risk of repetitive strain injuries. Lever offers a variable and precise air flow; also, it is designed to comfortably fit both small and large hands.
Airset Standard blow guns are tested individually during production: no leaks!
Built in ¼" Female brass thread, for a safe connection with no leaks
TECHNICAL DATA SHEET
|Blowing force (with a 6bar - 90psi inlet)||2,3 N|
|Air consumption (with a 6bar - 90psi inlet)||275 l/m - 9.7 scfm|
|Sound level (with a 6bar - 90psi inlet)||80 dB(A)|
|Weight||136 g - 0.30 lbs|
|Working temperature||-10°/70° - 14/158 °F|
|Max. Pressure||10 Bar - 145 psi|
|Nozzle length||137 mm - 5.40"|
|Valve||Acetal and stainless steel|
|STD S3 1002||Airset Standard L130 S BSP||1/4" BSP|
|STD S3 1003||Airset Standard L130 S NPT||1/4" NPT|
OSHA 1910.95 (b)
Max. 90 dB 8h
OSHA STD 1-13.1
Max 2 bar in uscita se bloccata
Max. 85 dB
STANDARD BLOW GUN WITH SILENCED NOZZLE
STANDARD BLOW GUN WITH ANGLED METAL PIPE
Ask for a quote